This is topic b&hdcr21/sankyo800.gate assembly. in forum 8mm Forum at 8mm Forum.
To visit this topic, use this URL:
https://8mmforum.film-tech.com/cgi-bin/ubb/ultimatebb.cgi?ubb=get_topic;f=1;t=001821
Posted by Andrew Wilson (Member # 538) on April 05, 2006, 12:45 PM:
hello fellow members,can anyone tell me if those two models have the same gate asembly,or are not the same.andy.
Posted by Andrew Wilson (Member # 538) on April 06, 2006, 02:01 PM:
ive stomped you all on this one.andy.
Posted by Mike Peckham (Member # 16) on April 06, 2006, 02:13 PM:
Andy
I think they probably do, wasn't that B and H simply a Sankyo 700 with a different case and new badging? In which case it would be the same, as the 700 shared the same gate assembly with the 702 and the 800, I think.
Mike
Posted by Jan Bister (Member # 332) on April 06, 2006, 08:41 PM:
Affirmative - the Bell & Howell DCM, DCR and DCT projectors were all built for B&H by Sankyo. It wouldn't make much sense if the gate assemblies were not the same.
Posted by Kevin Faulkner (Member # 6) on April 07, 2006, 09:18 AM:
All are identical. Kev.
Posted by Mark Todd (Member # 96) on April 08, 2006, 11:39 AM:
The 501 up are at least, the 301 is different, one side is plastic and not so good, not sure about the 401 but I found the 301 pretty naff.
Thankfully I`d just borrowed it and he got it for £2.
best Mark.
Visit www.film-tech.com for free equipment manual downloads. Copyright 2003-2019 Film-Tech Cinema Systems LLC
UBB.classicTM
6.3.1.2