8mm Forum: Eumig Mark S Sound Questions

This is topic Eumig Mark S Sound Questions in forum 8mm Forum at 8mm Forum.

To visit this topic, use this URL:
https://8mmforum.film-tech.com/cgi-bin/ubb/ultimatebb.cgi?ubb=get_topic;f=1;t=002430

Posted by Stewart McSporran (Member # 128) on January 18, 2007, 03:54 PM:

The sound isn't working on my Eumig Mark S. The valves light up, but there's nothing at all from the speaker, not even mains hum.

Does anyone know what the pin outs of the two DIN sockets on the back of the machine are? Any chance one is a line out that I could send to an external amplifier and not bother trying to fix the on board one?

Failing that, any tips for debugging this machine? I'm ok with digital electronics but valves are a little before my time!

thanks
Stewart

Posted by Craig Hamilton (Member # 258) on January 18, 2007, 06:29 PM:

Stuart

Have you checked all three valves? There is a valve located behind a black cover plate on the soundboard. It is held in place by a single brass screw.

Eumig Soundboard

Craig

Posted by Stewart McSporran (Member # 128) on January 19, 2007, 04:57 PM:

Craig, yes I did. I removed all the covers, etc, then powered up the machine.

UBB.classic^TM 6.3.1.2