This is topic Lamp upgrade in forum 8mm Forum at 8mm Forum.
To visit this topic, use this URL:
https://8mmforum.film-tech.com/cgi-bin/ubb/ultimatebb.cgi?ubb=get_topic;f=1;t=002483
Posted by Barry Johnson (Member # 84) on February 05, 2007, 02:41 PM:
Wish to change an old Bell & Howell 603 to take 12v100w two pin lamps.
What power supply do I need to achieve this?
Building a suitable base should pose no problem for the new lamp,I understand nine-fivers do it regularly.
Any info greatfully received.
Barry
Posted by Barry Johnson (Member # 84) on February 07, 2007, 01:45 PM:
Got the info I needed thanks-thought you lot were clever? Oh! I forgot,you only know GS1200s
Posted by Mike Peckham (Member # 16) on February 07, 2007, 02:10 PM:
And Sankyo 800s'
Mike
Posted by Tony Milman (Member # 7) on February 07, 2007, 05:03 PM:
And Eumigs
Posted by Kevin Faulkner (Member # 6) on February 07, 2007, 06:20 PM:
And uncle Tom Cobly and all.......
Kev.
Visit www.film-tech.com for free equipment manual downloads. Copyright 2003-2019 Film-Tech Cinema Systems LLC
UBB.classicTM
6.3.1.2