8mm Forum: Repair an Eumig C3

This is topic Repair an Eumig C3 in forum 8mm Forum at 8mm Forum.

To visit this topic, use this URL:
https://8mmforum.film-tech.com/cgi-bin/ubb/ultimatebb.cgi?ubb=get_topic;f=1;t=002641

Posted by Juan Bonet (Member # 795) on March 23, 2007, 12:02 PM:

I have an Eumig C3 but the charge is broken.
I want repair it but I can not take off the mechanism.
I unscrew the four screws that I have marked in the picture, but there is something does not allow to remove it me.
http://img390.imageshack.us/img390/1781/eumigtornillosgr1.jpg
How I can disassemble it?
I have repaired all my cameras, but I cannot repair this.
Thaks.

Posted by John Clancy (Member # 49) on March 24, 2007, 03:40 AM:

I believe Bolex still repair all Eumig cameras and projectors at their factory so if you don't crack it yourself all is not lost.

Hopefully someone on here may be able to point you in the right direction. If not, there is the 8mm film makers forum which is extremely active.

Posted by Joerg Polzfusz (Member # 602) on March 26, 2007, 06:14 AM:

Hi!

You might want to also try the Filmshooting forum since there are many posters that claim to repair their cameras by themselves.

Hope this helps,
Jörg

Posted by Juan Bonet (Member # 795) on March 27, 2007, 03:01 AM:

Thanks to all!

UBB.classic^TM 6.3.1.2