This is topic Active Adress for Reel Image in forum 8mm Forum at 8mm Forum.


To visit this topic, use this URL:
https://8mmforum.film-tech.com/cgi-bin/ubb/ultimatebb.cgi?ubb=get_topic;f=1;t=003212

Posted by Claus Harding (Member # 702) on November 05, 2007, 09:29 PM:
 
Hello again,

By way of Gary at Derann, I am trying to reach Reel Image on the web. Gary was nice and helpful and gave me a fax number which I will use, but the website seems to be old and not have a direct contact e-mail or number.

If someone has a number or current site info, that would be excellent. I can fax if I have to, but I wouldn't mind sending an e-note explaining what I am after (Elmo 1200-ft Super-8 reels.)

Thanks,
Claus.
 
Posted by Barry Attwood (Member # 100) on November 06, 2007, 02:34 AM:
 
Claus,

I think Steve Osborne is a little Computer phobic, as he either phones me or faxes me. I've got a feeling he's not too comftorble with computers, so I think you will have to contact him the old fashioned way.

[ November 06, 2007, 07:13 AM: Message edited by: Barry Attwood ]
 
Posted by Claus Harding (Member # 702) on November 06, 2007, 05:56 AM:
 
Thanks Barry,

Fax it is then. Not a problem.

Claus.
 
Posted by Gary Crawford (Member # 67) on November 06, 2007, 08:03 AM:
 
Claus...Steve has those reels. I get them from him fairly often. He does usually call back after I fax him. He works all day and does his business at home late at night. He calls my work number and leaves messages and info sometimes at midnight. I come in and get the info the next morning.
Incidentally ....your contributions lately to some of the threads here have been some of the most thought out, reasonable and well written I've ever seen on this forum.
 
Posted by Claus Harding (Member # 702) on November 06, 2007, 10:13 PM:
 
Gary,

Thank you for your kind words; I do try to 'rise to the occation', what with all the spirited debate around here [Smile]

I appreciate your mentioning the reels; I will definitely contact Steve and have him leave me a phone message; thanks for that information.

Best,
Claus.
 


Visit www.film-tech.com for free equipment manual downloads. Copyright 2003-2019 Film-Tech Cinema Systems LLC

Powered by Infopop Corporation
UBB.classicTM 6.3.1.2