This is topic just got a eumig 802 D projector have a lens question in forum 8mm Forum at 8mm Forum.


To visit this topic, use this URL:
https://8mmforum.film-tech.com/cgi-bin/ubb/ultimatebb.cgi?ubb=get_topic;f=1;t=003254

Posted by Eric Baucher (Member # 809) on November 19, 2007, 08:25 PM:
 
will the eumig 1.2 Suprogon lens from an 824 fit onto an 802 D? the 802 is a nice little projector. just thought it might look better with a lens upgrade. Mine has the 1.6 common to this projector, I know there is also a 1.3. any info would be helpful.
 
Posted by Stephen Spicer (Member # 950) on November 21, 2007, 02:09 PM:
 
Just about any Eumig lens will fit any moderately modern other Eumig- or for that matter a lot of other projectors as well. Near the end most were using the same barrel diameter - although you may find that focussing knobs don't always engage.

SS
 
Posted by David Roberts (Member # 197) on November 25, 2007, 12:18 PM:
 
the suprogon from your 824 will fit any of the 800 series,and is a much better lens than the slower ones. brighter too and a bigger picture for any given throw.
 


Visit www.film-tech.com for free equipment manual downloads. Copyright 2003-2019 Film-Tech Cinema Systems LLC

Powered by Infopop Corporation
UBB.classicTM 6.3.1.2