This is topic Elmo ST1200 Focus Query in forum 8mm Forum at 8mm Forum.
To visit this topic, use this URL:
https://8mmforum.film-tech.com/cgi-bin/ubb/ultimatebb.cgi?ubb=get_topic;f=1;t=003301
Posted by Simon McConway (Member # 219) on December 09, 2007, 02:10 PM:
On my Elmo ST 1200 HD, there is a minor focus problem in that I cannot get the entire picture pin-sharp. The right hand side of the picture is very slightly "soft" when the middle is fine. It's not a big problem, in fact most probably wouldn't even notice, but I just wondered if there was a simple adjustment?
Posted by Kevin Faulkner (Member # 6) on December 09, 2007, 02:19 PM:
Yes on the bottom of the lens mount on the right hand side as viewed from the front of the machine you will see a very small cross head screw. This is for making sure the lens is paralell to the film. Only a small adjustment will be needed.
Kev.
Visit www.film-tech.com for free equipment manual downloads. Copyright 2003-2019 Film-Tech Cinema Systems LLC
UBB.classicTM
6.3.1.2