This is topic Eumig P8m imperial forward/reverse switch in forum 8mm Forum at 8mm Forum.
To visit this topic, use this URL:
https://8mmforum.film-tech.com/cgi-bin/ubb/ultimatebb.cgi?ubb=get_topic;f=1;t=003310
Posted by Ethem Pekin (Member # 932) on December 13, 2007, 08:19 AM:
I am up again with another problem.
I guess the next projector I should get should be in good condtion but I still like to use older machines.
My first projector is Eumig P8 Imperial.
Yesterday the forward/reverse switch stuck in the reverse position. So I can not use it at the moment. I tried to open the cover but I can only access the motor and some other pieces. The on/off and forward/reverse switch is on the other side of the cover. Does anyone had this projector and came accross the same problem?
Can I access the other side of the projector?
You may find the photos of the projector from the following link:
http://www.marriottworld.com/pieces/pieces25_b.htm
Kind regards,
Visit www.film-tech.com for free equipment manual downloads. Copyright 2003-2019 Film-Tech Cinema Systems LLC
UBB.classicTM
6.3.1.2