8mm Forum: ST1200HD

This is topic ST1200HD in forum 8mm Forum at 8mm Forum.

To visit this topic, use this URL:
https://8mmforum.film-tech.com/cgi-bin/ubb/ultimatebb.cgi?ubb=get_topic;f=1;t=003381

Posted by Jim Schrader (Member # 9) on January 13, 2008, 07:52 AM:

I noticed on this projector the plug in to the machine has been modified? take a look at the pictures it is the third one on the right side.
http://cgi.ebay.com/ws/eBayISAPI.dll?ViewItem&item=150203258381

Posted by Claus Harding (Member # 702) on January 13, 2008, 08:55 AM:

Jim,

That is an odd power connector on that 1200. From what I remember from my A/V days, it looks like a 2-pin plug with a locking collar of the type that used to be on some Xenon slide projectors (I could be wrong, but that's what it reminds me of.)

Claus.

Posted by Chip Gelmini (Member # 44) on January 13, 2008, 09:36 AM:

I was the high bidder up to a few minutes ago. I saw this post and immediately cancelled all my bids. I never looked at all those pics. THANK YOU GUYS. This machine has probably seen some rough times and could be nothing but trouble. The correct socket plug for the ST1200HD in America is 3 pin, flat, black (hot) white (neutral) & green (ground). The exact same power cord fitting as most American computer power cords.

Buyer beware.

Posted by David Pannell (Member # 300) on January 13, 2008, 10:13 AM:

You're absolutely right, chaps.

In the UK, the correct connector is known as the IEC 6amp 3-pin.

Lucky escape, Chip! [Eek!]

Posted by Antoine Orsero (Member # 41) on January 15, 2008, 04:49 AM:

Hi,

Can you tell me if belts round of the same size may be correct to a ST1200 Elmo?

Thanks

Posted by Eric Baucher (Member # 809) on January 15, 2008, 08:17 PM:

that might be a 1.0 lens on that one too, that alone is worth the price it finished for. wonder if that person is a memeber of this forum.

UBB.classic^TM 6.3.1.2