8mm Forum: washer pulleys needed for ELMO ST1200HD

This is topic washer pulleys needed for ELMO ST1200HD in forum 8mm Forum at 8mm Forum.

To visit this topic, use this URL:
https://8mmforum.film-tech.com/cgi-bin/ubb/ultimatebb.cgi?ubb=get_topic;f=1;t=003442

Posted by Eric Baucher (Member # 809) on February 03, 2008, 08:06 PM:

anybody know of a source? I know its a llong shot but thought ID try.

Posted by Tom Photiou (Member # 130) on February 05, 2008, 02:02 PM:

Sorry Eric, what are you calling washer pulleys please?

Posted by Eric Baucher (Member # 809) on February 05, 2008, 05:31 PM:

they are made of rubber, there is one for 18fps mode and one for 24fps mode. I lost the piece of paper with the part number on iit, but if you have a service manual for the HD thats what the part is called.

Posted by Kevin Faulkner (Member # 6) on February 05, 2008, 05:49 PM:

Toms your man Eric [Smile]

Posted by Eric Baucher (Member # 809) on February 05, 2008, 08:52 PM:

*fingers crossed* hope you have them Tom! It will save the life of one of my 1200HD's. the rest of the machine is fine but the pulleys are gonna need to be replaced, or the machine will die soon, and its a Mag/optical version so I really want save it, and it was the first 1200HD I ever owned, so it has sentimental value too! [Smile]

Posted by Tom Photiou (Member # 130) on February 06, 2008, 02:05 PM:

Hello Eric,
I have just checked and i do have one last pair left,
unfortunatly after these that really is it unless i get another 20 orders which is highly unlikely, so if you wish i'll be happy to keep these for you,
my e amil is tphotiou at blueyonder dot co dot uk

Posted by Eric Baucher (Member # 809) on February 06, 2008, 09:15 PM:

sent you an email Tom thanks!

Posted by Eric Baucher (Member # 809) on February 08, 2008, 06:49 PM:

hey tom havent heard from you yet, whats up?

Posted by Edwin van Eck (Member # 4690) on September 16, 2016, 06:46 AM:

For anyone who has a worn out / broken motor pulley for an Elmo ST1200, we have a solution now!

We are encountering more and more broken pulleys for the Elmo ST-1200 projectors. This is an example of one encountered:

To be able to repair this projector, we have taken this part in production again:

More information about this part: http://shop.van-eck.net/?_globalsearch=pp-0161

All available parts currently for Elmo ST1200: http://www.van-eck.net/itable.php?lang=nl&size=0&cat=film&merk=52&type=ST-1200%20HD%20M

UBB.classic^TM 6.3.1.2