This is topic st1200 belts in forum 8mm Forum at 8mm Forum.


To visit this topic, use this URL:
https://8mmforum.film-tech.com/cgi-bin/ubb/ultimatebb.cgi?ubb=get_topic;f=1;t=003652

---

Posted by David Roberts (Member # 197) on April 25, 2008, 11:28 AM:
 
does the st1200 use the same belts as st1200d?

anyone know,thanks in advance.

david.
 

---

Posted by Robin Moss (Member # 706) on April 26, 2008, 05:19 PM:
 
Hi David. Most ST1200D's have the same three belts as the ST1200 HD's ie two drive belts and a take-up belt, all of a square crossection. However, I have also known a few models with the two original belts of the ST1200 ie a tractor ridged type take-up belt and one drive belt.
I have one or two spare square crossection take-up belts if you're stuck, for the ST1200HD style, but none for the ST1200 earlier model. Hope that helps. Robin
 

---

Posted by David Roberts (Member # 197) on April 28, 2008, 12:59 PM:
 
thanks robin,ill get back to you if need be.

david
 

---

Visit www.film-tech.com for free equipment manual downloads. Copyright 2003-2019 Film-Tech Cinema Systems LLC


UBB.classic^TM 6.3.1.2