This is topic Faulty ST180 Motor control in forum 8mm Forum at 8mm Forum.


To visit this topic, use this URL:
https://8mmforum.film-tech.com/cgi-bin/ubb/ultimatebb.cgi?ubb=get_topic;f=1;t=003744
Posted by Mark Norton (Member # 165) on May 28, 2008, 10:59 AM:
 
Hi , I have a sick ST180, The faults are as follows:
The speed varies wildly,
The 18 / 24 fps switch has no control over the motor speed.
It slows down when the lamp is switched on.
Any clues on what to look for would be appreciated.
 


Visit www.film-tech.com for free equipment manual downloads. Copyright 2003-2019 Film-Tech Cinema Systems LLC

Powered by Infopop Corporation
UBB.classicTM 6.3.1.2