This is topic changing an ST1200D counter belt in forum 8mm Forum at 8mm Forum.


To visit this topic, use this URL:
https://8mmforum.film-tech.com/cgi-bin/ubb/ultimatebb.cgi?ubb=get_topic;f=1;t=003764

---

Posted by Joe Taffis (Member # 4) on June 03, 2008, 01:11 PM:
 
Does anyone have any advice on the easiest way to replace the tiny frame counter belt? I did change one a few years ago on a different machine, also a ST1200D. I don't remember removing anything to do it...or did I? Any tips appreciated. NEVER MIND....GOT IT. I removed the lamp to get the belt on the counter pulley, and the small lower green guide to loop the belt onto the sprocket wheel pulley.

[ June 04, 2008, 04:57 AM: Message edited by: Joe Taffis ]
 

---

Posted by Jan Bister (Member # 332) on June 06, 2008, 04:50 PM:
 
Funny, that's exactly what I did to change the belt, too.
 

---

Posted by Kevin Faulkner (Member # 6) on June 06, 2008, 05:13 PM:
 
It also helps to have small fingers

Kev.
 

---

Posted by Graham Sinden (Member # 431) on June 07, 2008, 09:05 AM:
 
When I tried it I used a couple of small screwdrivers as sticks to help ease it into place. Also a lot of patience.
 

---

Visit www.film-tech.com for free equipment manual downloads. Copyright 2003-2019 Film-Tech Cinema Systems LLC


UBB.classic^TM 6.3.1.2