This is topic Super 8 Projector Repair question... in forum 8mm Forum at 8mm Forum.


To visit this topic, use this URL:
https://8mmforum.film-tech.com/cgi-bin/ubb/ultimatebb.cgi?ubb=get_topic;f=1;t=003965
Posted by Robert Neia (Member # 890) on August 29, 2008, 06:34 PM:
 
Hello All,

I have a Eumig projector that has a damaged claw. I was hoping to get another eumig projector and take its claw out and put it into my eumig and see if i could get it running. I was wondering if there will be any type of an issue in terms of part compatibility? Any ideas? Thanks...
 
Posted by Sam J. Clarke (Member # 1157) on August 29, 2008, 06:54 PM:
 
I have an Eumig Mark S (Can't remember model) which is broken, if you don't already have a new claw and there are no compatibility problems you can have the one from that.

Sam
 


Visit www.film-tech.com for free equipment manual downloads. Copyright 2003-2019 Film-Tech Cinema Systems LLC

Powered by Infopop Corporation
UBB.classicTM 6.3.1.2