This is topic Elmo St 1200 ground noise problem? in forum 8mm Forum at 8mm Forum.
To visit this topic, use this URL:
https://8mmforum.film-tech.com/cgi-bin/ubb/ultimatebb.cgi?ubb=get_topic;f=1;t=004042
Posted by Robert Oakley (Member # 141) on September 29, 2008, 10:25 PM:
It sounds like a ground wire is broken, checking the amplifer, I not showing and sign of broken wires. Has anyone else encountered this?
Posted by Chip Gelmini (Member # 44) on September 29, 2008, 11:24 PM:
Maybe it is something else on your system. Check all other devices for something that is not grounded, and/or outlets that are not grounded.
Posted by Robert Oakley (Member # 141) on October 01, 2008, 10:41 PM:
Thanks for the advice chip but it didn't help in my case. The amp says STK 106 power amp, is that normal for the st1200? I googled that term and got a bunch of matches for STK and Amplifiers. Any advice would be appreciated.
Visit www.film-tech.com for free equipment manual downloads. Copyright 2003-2019 Film-Tech Cinema Systems LLC
UBB.classicTM
6.3.1.2