This is topic Feeding problem with my Elmo ST-1200HD in forum 8mm Forum at 8mm Forum.


To visit this topic, use this URL:
https://8mmforum.film-tech.com/cgi-bin/ubb/ultimatebb.cgi?ubb=get_topic;f=1;t=004345

---

Posted by Angelo Pisano (Member # 1445) on February 17, 2009, 01:42 AM:
 
Hi,

Here is my problem

I depress the auto-threading lever to feed the film and that lever is supposed to be released automatically by the threaded film.

When the film reaches the take-up reel, that lever stays down and depressing the auto threading release lever manually, doesn’t do anything.

What is wrong?

Thank you for your help

Angelo
 

---

Posted by Michael Beyer (Member # 1143) on February 17, 2009, 03:33 AM:
 
Hi Angelo,
if you are using 360m-Reels, you must always push the button manually if the take-up-reel is loaded.
If the film is not on the take-up-reel, then you have problems to push the button.

Regards,
Michael
 

---

Visit www.film-tech.com for free equipment manual downloads. Copyright 2003-2019 Film-Tech Cinema Systems LLC


UBB.classic^TM 6.3.1.2