This is topic Overhaul/PM on new (to me) Chinon 2500GL in forum 8mm Forum at 8mm Forum.


To visit this topic, use this URL:
https://8mmforum.film-tech.com/cgi-bin/ubb/ultimatebb.cgi?ubb=get_topic;f=1;t=004525
Posted by Brad Anesi (Member # 1555) on May 09, 2009, 04:46 PM:
 
I just picked up a Chinon 2500GL, and while my initial test indicates that it works (including the speed adjustment), I'd rather give it a quick inspection/overhaul/preventative maintenance "tune up" before running any film through it. Does anyone have either some general or specific guidance for this model? I'm reasonably mechanically inclined, so I'm not afraid to open things up.

If there's any specific thread in here that you can point me to or a link elsewhere, that's totally fine too.
 


Visit www.film-tech.com for free equipment manual downloads. Copyright 2003-2019 Film-Tech Cinema Systems LLC

Powered by Infopop Corporation
UBB.classicTM 6.3.1.2