This is topic Fuses for a Bolex-Paillard 18-5 projector in forum 8mm Forum at 8mm Forum.


To visit this topic, use this URL:
https://8mmforum.film-tech.com/cgi-bin/ubb/ultimatebb.cgi?ubb=get_topic;f=1;t=004657

---

Posted by Patrick Briar (Member # 1657) on July 03, 2009, 07:24 AM:
 
Does anyone know the type of fuse that the Bolex 18-5 uses? I need to find a replacement and have lost the old fuse. Is there a specific amperage and length or is this a suitable substitute that I can pick up at Radio Shack?

Thanks for your help,

Patrick.
 

---

Posted by Glenn Brady (Member # 715) on July 03, 2009, 07:38 AM:
 
Instructions for my 18-5 indicate that, for voltages up to 160V, the fuse should be 1.25A. The fuse is 3/4-inch long.

[ July 03, 2009, 11:10 AM: Message edited by: Glenn Brady ]
 

---

Posted by Patrick Briar (Member # 1657) on July 03, 2009, 03:44 PM:
 
Thanks for the post!
 

---

Visit www.film-tech.com for free equipment manual downloads. Copyright 2003-2019 Film-Tech Cinema Systems LLC


UBB.classic^TM 6.3.1.2