This is topic SUPER 8 BLACK LEADER WANTED in forum 8mm Forum at 8mm Forum.


To visit this topic, use this URL:
https://8mmforum.film-tech.com/cgi-bin/ubb/ultimatebb.cgi?ubb=get_topic;f=1;t=004748

Posted by Chip Gelmini (Member # 44) on August 04, 2009, 02:36 PM:
 
I'll take whatever I can get. Please help me if you can. No other color will do. No longer made by Neumade Products.

Attn David M Leugers: You once offered me some of this if you still have it available I will take it.

Chip G
 
Posted by Bart Smith (Member # 780) on August 04, 2009, 03:26 PM:
 
There is a seller on eBay.co.uk with some at the moment:

http://cgi.ebay.co.uk/ws/eBayISAPI.dll?ViewItem&item=170364813091
 
Posted by Greg Marshall (Member # 1268) on August 04, 2009, 07:32 PM:
 
I wouldn't mind getting some myself... let me know if you run across some. Thanks!
 
Posted by Gary Crawford (Member # 67) on August 05, 2009, 07:53 AM:
 
I got some from Steve Osborne at Reel Image , I believe.
 
Posted by Chip Gelmini (Member # 44) on August 05, 2009, 09:17 AM:
 
Hello to everyone

Thank you for your help with what I needed.

CG
 
Posted by Bill Brandenstein (Member # 892) on August 26, 2009, 06:48 PM:
 
Well Chip, what did you end up doing?

I used to use Neumade when I first started collecting and now am having to slowly replace all of it. The holes are not positioned at precisely the right place either in width or in the holes per foot (seems closer to 73 than 72), and jam the Elmo projector right away because the lower sprocket will not enagage the holes. I didn't have access to the Elmo when I first got that leader, so I can't say whether the film is shrunken or not; but Neumade leader is definitely not triacetate base and wierd stuff may go on with it. Just picked up some old library films and the 16mm white leader on all the heads of them is warped and incorrectly spaced as well. So boo for Neumade.

One option for blackout is to use unprocessed color negative film, which is extremely opaque. I wish labs would give up waste footage for free as slug. See the changeover thread for additional thoughts on this.
 
Posted by Hans van der Sloot (Member # 494) on September 09, 2009, 03:35 PM:
 
I got about 60m / 180ft of black film to give away.
Perhaps "pieces of dark film" would be a better dicription.
Some pieces have stripe, others don't.
These are all scrap pieces of film.
 
Posted by Chip Gelmini (Member # 44) on September 09, 2009, 06:13 PM:
 
Hans

You can send it here

CHIP GELMINI
PO BOX 1905
MASHPEE MA USA 02649
 
Posted by Hans van der Sloot (Member # 494) on September 10, 2009, 05:22 PM:
 
Hi Chip,

Shipping will be € 5.70
Perhaps you can send me an email?
 


Visit www.film-tech.com for free equipment manual downloads. Copyright 2003-2019 Film-Tech Cinema Systems LLC

Powered by Infopop Corporation
UBB.classicTM 6.3.1.2