8mm Forum: Changing take up belt on a Fujicascope MG90

This is topic Changing take up belt on a Fujicascope MG90 in forum 8mm Forum at 8mm Forum.

To visit this topic, use this URL:
https://8mmforum.film-tech.com/cgi-bin/ubb/ultimatebb.cgi?ubb=get_topic;f=1;t=004812

Posted by John Davis (Member # 1184) on September 03, 2009, 02:42 PM:

I have managed to get my hands on a set of belts for this projector and intend to replace the belt for the take-up reel, which is the longest of the set. Having taken the back cover off, my jaw has hit the table - Droopy style. It looks very daunting!
Has anyone any experience changing the belts on these machines (I think they match the MX50 and MX70 as externally they all look quite similar),
help!
John

Posted by Peter van den Oetelaar (Member # 5042) on September 22, 2015, 06:39 PM:

I would like to know this too :-)

I've got one of these with the sync box.

Posted by Steve Klare (Member # 12) on September 22, 2015, 09:11 PM:

The best thing to do is try to find the manual for this machine: I'm seeing .pdf copies available on the 'net., maybe used ones will pop up on E-bay.

With a little luck somebody here knows this machine. It's not among the ones we commonly discuss here, but there are a lot of members so just maybe...

UBB.classic^TM 6.3.1.2