This is topic Elmo 912 editor in forum 8mm Forum at 8mm Forum.


To visit this topic, use this URL:
https://8mmforum.film-tech.com/cgi-bin/ubb/ultimatebb.cgi?ubb=get_topic;f=1;t=004892

---

Posted by Geoff Rogers (Member # 1338) on October 10, 2009, 10:21 AM:
 
Hello

I've just purchased an Elmo 912 editor and need a manual for it. If anyone can point me in the right direction of one I'd be most greatful.

Geoff Rogers
 

---

Posted by John Davis (Member # 1184) on October 10, 2009, 11:31 AM:
 
Hi Geoff,
go to http://www.super8data.com/ and click on 'manuals' , under 'viewers/editors' there is a link to a 'Goko G1001'. this should do as the machines were very similar and probably both came from the Goko factory,
John
 

---

Posted by Geoff Rogers (Member # 1338) on October 11, 2009, 03:29 PM:
 
Hello John

Thanks for the link, the Goko G1001 is not a dual editor whereas the Elmo 912 is. I was wondering how you change between super 8 and standard 8.

Geoff
 

---

Posted by Joe Taffis (Member # 4) on October 11, 2009, 04:09 PM:
 
Geoff, I have the original Elmo manual if you need a copy, but to change from regular/standard 8 to super 8 (or vice versa), just turn the slot under the sprocket wheel with your fingernail or a flat edge screwdriver.
 

---

Posted by Geoff Rogers (Member # 1338) on October 11, 2009, 05:01 PM:
 
Hello Joe

If you can email me a copy that would be great.

email addtress rogersga at btinternet dot com

Thanks
Geoff Rogers
 

---

Posted by Joe Taffis (Member # 4) on October 12, 2009, 03:43 PM:
 
hi Geoff, just sent you scans of the manual, let me know if they're big enough.
 

---

Posted by Geoff Rogers (Member # 1338) on October 12, 2009, 04:00 PM:
 
Hi Joe

Thanks for the scans, I've sent you an email.

Geoff
 

---

Visit www.film-tech.com for free equipment manual downloads. Copyright 2003-2019 Film-Tech Cinema Systems LLC


UBB.classic^TM 6.3.1.2