This is topic Elmo GP-E UK voltage? in forum 8mm Forum at 8mm Forum.


To visit this topic, use this URL:
https://8mmforum.film-tech.com/cgi-bin/ubb/ultimatebb.cgi?ubb=get_topic;f=1;t=005323

---

Posted by Richard Kemp (Member # 1621) on March 09, 2010, 05:31 PM:
 
Hi,

I just fitted a new belt to one of two GP-E's and noticed these projectors both have different voltages set! :-o One has 220V and the other 240V. What is best for the UK please and how have I got away with the wrong(?) voltage on one of these projectors without realising it?

Many thanks
 

---

Posted by Winbert Hutahaean (Member # 58) on March 09, 2010, 06:11 PM:
 
Is there any problem with slightly different voltage setting? I don't think so.

In fact, many people (mostly when voltage supply is not stable) tend to set the voltage a bit higher (i.e 240v from the original 220v supply) so when there is changing of voltage, it will not harm the equipments.

My 2 cents though,
 

---

Visit www.film-tech.com for free equipment manual downloads. Copyright 2003-2019 Film-Tech Cinema Systems LLC


UBB.classic^TM 6.3.1.2