This is topic Eumig 802 - 807 Tension Spring in forum 8mm Forum at 8mm Forum.


To visit this topic, use this URL:
https://8mmforum.film-tech.com/cgi-bin/ubb/ultimatebb.cgi?ubb=get_topic;f=1;t=005447
Posted by Robert Tucker (Member # 386) on May 07, 2010, 06:59 AM:
 
Can anyone give me instructions how to replace this and locate it. I have a speed problem with a Eumig and have tried all the solutions apart from this. I believe replacing the tension Spring should cure my problem.
 


Visit www.film-tech.com for free equipment manual downloads. Copyright 2003-2019 Film-Tech Cinema Systems LLC

Powered by Infopop Corporation
UBB.classicTM 6.3.1.2