8mm Forum: Eumig 824 SonoMatic Part needed

This is topic Eumig 824 SonoMatic Part needed in forum 8mm Forum at 8mm Forum.

To visit this topic, use this URL:
https://8mmforum.film-tech.com/cgi-bin/ubb/ultimatebb.cgi?ubb=get_topic;f=1;t=005947

Posted by Joe Padavic (Member # 2412) on January 22, 2011, 07:46 AM:

I recently acquired a Eumig 824 Sonomatic in excellent condition.
I am in need of the 8mm pressure plate. If anyone knows where I can get one please contact me. Thanks, Joe

I am told that the 8mm pressure plate from the Eumig 824 SonoMatic is interchangeable with any of the Eumig 800 Series.

Posted by Neil Townsend (Member # 952) on January 22, 2011, 11:03 AM:

hi, I have a Eumig 822 sonomatic I bought years ago that is not
in working condition. It does have the 8mm and super 8 pressure plates. The claw that pulls the film through is broken. I bought it at a thrift shop, took it home and found out it didn't work. That was in 1995. I was going to get rid of the projector, but hoped someone could use it. I would rather have someone take the whole projector. Would you like it for spare parts?
Just ask that you would pay the shipping.

Posted by Joe Padavic (Member # 2412) on January 22, 2011, 11:43 AM:

Sounds great. e-mail me for my address and shipping costs.
joe@teardropvideo.com

UBB.classic^TM 6.3.1.2