This is topic Popping In Speakers in forum 8mm Forum at 8mm Forum.


To visit this topic, use this URL:
https://8mmforum.film-tech.com/cgi-bin/ubb/ultimatebb.cgi?ubb=get_topic;f=1;t=006295

Posted by Steve Klare (Member # 12) on June 17, 2011, 08:56 AM:
 
I watched a new film last night, but when I was ready to start I heard a random popping in my speakers.

-Suffice it to say I didn't enjoy the film as much as I should have. The popping came through the sound track too.

After it was over I accepted the idea that I had an ailing projector and started trying to isolate where the problem was. I was operating my ST-1200HD and I also had my ST-800 on the table. Both were plugged in to power and to the sound system. I tried unplugging one machine: still there. I tried unplugging the other: still there. I tried unplugging both: it stopped.

Then I plugged both back in...and unplugged the laptop I had plugged into the same outlet strip: peace at last!

Guess I need to be a little more careful what I allow on that power strip.

I'll watch that reel again tonight, maybe even enjoy it!
 
Posted by Osi Osgood (Member # 424) on June 17, 2011, 01:50 PM:
 
I ran into a similar situation, but that involves my music recording. I had a distinct "buzz" in my headphones, and checked everything for over thirty minutes trying to find the problem ... it turned out to be the damned headphones.

I had that problem with my optical sound projector once, but I think it came down to a faulty optical sound track that just had a lot of "bumps".
 


Visit www.film-tech.com for free equipment manual downloads. Copyright 2003-2019 Film-Tech Cinema Systems LLC

Powered by Infopop Corporation
UBB.classicTM 6.3.1.2