8mm Forum: Cinerex 727 Belt

This is topic Cinerex 727 Belt in forum 8mm Forum at 8mm Forum.

To visit this topic, use this URL:
https://8mmforum.film-tech.com/cgi-bin/ubb/ultimatebb.cgi?ubb=get_topic;f=1;t=007058

Posted by Andrew Long (Member # 2134) on April 28, 2012, 01:51 PM:

Hi,

I have a couple of projectors, an Eumig R2000 and a Cinerex 727 (I know some people call them cine wrecks). Anyway, the belt on the 727 is so loose the film often stops.
I did a quick ebay search and found a belt for a 707. Does anyone know if this is the same belt, or where I can get a belt for the 727?
I have also seen mentioned a belt kit, where you can make your own. Are these any good? Who in the UK (or USA if they post to UK) would sell them?

Many thanks

Andy

Posted by Janice Glesser (Member # 2758) on February 19, 2014, 04:05 PM:

Andy...I know this is an old post and you have either found a belt or sold the projector. However, for the sake of any others who may be looking for this belt ...the motor belt for the Chinon Whisper 727 and the Bell & Howell 10MS have the same size belt as the Cinerex 727. Other than the case...they are all essentially the same projector.

UBB.classic^TM 6.3.1.2