8mm Forum: Projector Parts

This is topic Projector Parts in forum 8mm Forum at 8mm Forum.

To visit this topic, use this URL:
https://8mmforum.film-tech.com/cgi-bin/ubb/ultimatebb.cgi?ubb=get_topic;f=1;t=007601

Posted by John Selph (Member # 3366) on November 11, 2012, 05:17 PM:

Hey y'all,
Glad I found this forum. I just acquired a B&H 10ms Dual 8 projector and the Supply Reel Spindle is damaged. Is there anyplace to purchase such parts? Everything else works fine, and you can even show film, but because the supply spindle is damaged, it won't rewind the film. Could also use a manual for this machine as well. I have 20 or so 50' reels and several 400' reels of family films that I want to digitize.
Any recommendations, thoughts, and suggestions would be greatly appreciated.
Thanks,
John

Posted by John Selph (Member # 3366) on November 19, 2012, 02:11 PM:

Just a "Heads Up" to everyone, I found someone on eBay (USA) who advertises parts for various projectors. I contacted him regarding the spindle and he sold me one for $17.50 shipped. I am waiting for it to arrive to make sure it is the correct part, but I sent him a photo so hopefully it's right.
If everything is correct, and it's acceptable to post vendor info on this forum, I'll supply his information.
Thanks,
John

[ November 19, 2012, 04:53 PM: Message edited by: John Selph ]

Posted by John Selph (Member # 3366) on November 24, 2012, 11:12 PM:

Part arrived yesterday. Looked good as new and was perfect fit. Well packed and quick shipping. I have no personal interest in this vendor, just passing on information should anyone here need projector parts. The vendor is dmodeforlife on eBay. Seems to have lots of parts for various makes of projectors.
John

UBB.classic^TM 6.3.1.2