8mm Forum: Eumig Mark-S 712 D

This is topic Eumig Mark-S 712 D in forum 8mm Forum at 8mm Forum.

To visit this topic, use this URL:
https://8mmforum.film-tech.com/cgi-bin/ubb/ultimatebb.cgi?ubb=get_topic;f=1;t=007727

Posted by Bruce Baldwin (Member # 3415) on December 16, 2012, 04:30 AM:

Please can anybody assist in how to change the sprockets of this projector and what it looks like as I did not get the sprockets to change it to a normal 8. I am a toolmaker by trade and can make it if provided a picture of the said component. If I can purchase the components it will be highly appreciated. Please contact me on my e-mail at bbaldwin@iburst.co.za.

Posted by Pasquale DAlessio (Member # 2052) on December 16, 2012, 05:32 AM:

Hi Bruce

Welcome to the forum!

Just pull the film guide down and the sprockets twist and pull off. You also need to change the film channel guide near the lens.

PatD

[ December 16, 2012, 08:52 AM: Message edited by: Pasquale DAlessio ]

UBB.classic^TM 6.3.1.2