This is topic Develop Kodachrome 40 Film in forum 8mm Forum at 8mm Forum.
To visit this topic, use this URL:
https://8mmforum.film-tech.com/cgi-bin/ubb/ultimatebb.cgi?ubb=get_topic;f=1;t=007960
Posted by Pasquale DAlessio (Member # 2052) on February 26, 2013, 04:44 PM:
Where (if anywhere)can I get a roll of Kodachrome 40 film developed?
Posted by Bryan Chernick (Member # 1998) on February 26, 2013, 05:04 PM:
Try Film Rescue International. I just sent them an old roll of Kodacolor-X 620 film that I found in a Kodak Hawkeye Brownie. There was one picture left on the roll so I took a long exposure with it. I don't have much hope of getting anything from that but I'm interested to see what's on the rest of the film. I think they stopped making Kodacolor-X in 1974.
If the film was exposed when it was fresh they will have a much better chance of recovering images compared to exposing an expired roll now. I think they get pretty good black and white results from Kodachrome.
Posted by Pasquale DAlessio (Member # 2052) on February 27, 2013, 01:58 AM:
Thanks Bryan. Their prices are very reasonable.
Posted by Joerg Polzfusz (Member # 602) on February 27, 2013, 07:14 AM:
You can also try
Plattsburgh-Photographic-Services
Martin W. Baumgarten
18 Elm Street
Plattsburgh, New York 12901 U.S.A.
E-Mail: Super8mm@aol.com
Tel: (518) 561-6312
Posted by Jake Mayes (Member # 3292) on February 27, 2013, 09:02 AM:
It can no longer be processed as colour, the process was too complex for any home user to do, and the machines required were massive. The couplers were not in the film, but were added during processing. It involved individual couplers being added for each colour, a developer for each colour, and exposure to colours of light through one side of the film perfectly at different points of the process. And the couplers are no longer made. They would process it only as B/W neg usually. If you wanted a print made from said neg, if you wanted to project the result, i would contact andec on that! If they processed as reversal the yellow cast would be visible during viewing and normally its not done.
Hope this helps!
Jacob
Posted by David Huthmacher (Member # 3572) on March 02, 2013, 09:48 AM:
Thanks guys!
Visit www.film-tech.com for free equipment manual downloads. Copyright 2003-2019 Film-Tech Cinema Systems LLC
UBB.classicTM
6.3.1.2