This is topic Glue or epoxy for Anscovision name or diagram plates? in forum 8mm Forum at 8mm Forum.


To visit this topic, use this URL:
https://8mmforum.film-tech.com/cgi-bin/ubb/ultimatebb.cgi?ubb=get_topic;f=1;t=008053
Posted by Norman Hixenbaugh (Member # 1566) on March 29, 2013, 06:46 PM:
 
What adhesive do any of you use to re-affix the thin metal instruction plate, situated above the lens, feed and film exit channels, on the Anscovision projectors. The back is slightly tacky and presses against the metal housing.
 
Posted by Janice Glesser (Member # 2758) on March 29, 2013, 07:29 PM:
 
This works well.

-
 


Visit www.film-tech.com for free equipment manual downloads. Copyright 2003-2019 Film-Tech Cinema Systems LLC

Powered by Infopop Corporation
UBB.classicTM 6.3.1.2