8mm Forum: Scope Q

This is topic Scope Q in forum 8mm Forum at 8mm Forum.

To visit this topic, use this URL:
https://8mmforum.film-tech.com/cgi-bin/ubb/ultimatebb.cgi?ubb=get_topic;f=1;t=008351

Posted by Moshe Yitzhak (Member # 2718) on July 09, 2013, 11:50 PM:

I have both Elmo ST 180 and 1200.

Wanted to know if the Lens :

SANKOR ANAMORPHIC CINEMASCOPE LENS / OBJECTIV 16-D no. 51284

will fit my projector?

Posted by Akshay Nanjangud (Member # 2828) on July 10, 2013, 12:14 AM:

Obviously they don't! Sell me all your scope prints, pronto!!

I don't know Moshe. Someone else will let you know.

Posted by Dominique De Bast (Member # 3798) on July 10, 2013, 12:52 AM:

Hello, Moshe. I have a scope lens but I don't put it directly on the projector instead of the original lense but in front of it with a bracket. By the way, I went to the flea market in Jaffa but didn't see any film. But i's a nice place and will for sure go back.

Posted by Joe Taffis (Member # 4) on July 10, 2013, 06:09 AM:

Moshe, the 16-D should work with an adapter. This is my 16-D scope lens with an adapter available from Wittner in Germany, and here in the U.S.A. from The Reel Image. The adapter attaches easily to the front of the Elmo projectors, and the lens slips right into the inner aluminum ring, which I think is 52 cm for the 16-D....

[IMG]http://8mmforum.film-tech.com/cgi-bin/showpic.cgi?dir=uploads0503&file=rsz _dcp_3.jpg[/IMG]

[IMG]http://8mmforum.film-tech.com/cgi-bin/showpic.cgi?dir=uploads050 3&file=rsz_dcp_5.jpg[/IMG]

UBB.classic^TM 6.3.1.2