This is topic GAF/Ansco Bulb Conversion in forum 8mm Forum at 8mm Forum.


To visit this topic, use this URL:
https://8mmforum.film-tech.com/cgi-bin/ubb/ultimatebb.cgi?ubb=get_topic;f=1;t=008377
Posted by Pasquale DAlessio (Member # 2052) on July 16, 2013, 06:54 PM:
 
I just finished this conversion. I replaced the expensive 30v 80w BLG bulb around 60.00 with a 30v 80w ELE bulb about 15.00. Works great. The original base is still there. I used two of the tongs to mount the base of the bulb holder to it. Then 2 bolts in the front or rear depending on your perspective. I soldered the leads into the pin holes in the original socket. All you have to do is find the socket. I took it off an old parts machine. Done!

PatD

-
 


Visit www.film-tech.com for free equipment manual downloads. Copyright 2003-2019 Film-Tech Cinema Systems LLC

Powered by Infopop Corporation
UBB.classicTM 6.3.1.2