This is topic Sanko Daulist 1000 in forum 8mm Forum at 8mm Forum.


To visit this topic, use this URL:
https://8mmforum.film-tech.com/cgi-bin/ubb/ultimatebb.cgi?ubb=get_topic;f=1;t=008391
Posted by Robert Johnson (Member # 3834) on July 20, 2013, 01:07 AM:
 
Hi I bought a Sankyo 1000 recently , The auto load works but the take up real stops soon afterwards . Could this be the the take up real belt slightly stretched ? All help appreciated thanks
 
Posted by Janice Glesser (Member # 2758) on July 20, 2013, 10:25 PM:
 
You most likely need a new motor belt. Just unscrew the two screws on the back of the projector ... remove the back... and examine the belt. Watch this video I made on replacing the belt. I also give dimensions for an o-ring replacement or you can just order one off eBay.

http://www.youtube.com/watch?v=rog95Djbtpc
 


Visit www.film-tech.com for free equipment manual downloads. Copyright 2003-2019 Film-Tech Cinema Systems LLC

Powered by Infopop Corporation
UBB.classicTM 6.3.1.2