This is topic Technicolor Cartridge Projector Gear in forum 8mm Forum at 8mm Forum.


To visit this topic, use this URL:
https://8mmforum.film-tech.com/cgi-bin/ubb/ultimatebb.cgi?ubb=get_topic;f=1;t=008418
Posted by Steven J Calandra (Member # 3845) on July 29, 2013, 12:41 PM:
 
Guys I have two 1000 BX Projectors that were used in General Motors Car dealrships in the 1970's. The shutter gear is stripped on one side. because it's made of soft plastic.
Do you know how I could get a replacement?
Or someone with a New 3D printer that can make one out of plastic, and possibly make a supply to other enthusiasts with the same machines. [Big Grin]
 
Posted by Frank Harer (Member # 6032) on January 06, 2019, 08:13 PM:
 
Hey Steven, did you ever luck out with a new cam gear assembly for the projector? I just fired mine up after a complete restoration (but with the original cam gear assembly), and the metal shutter gear took off every tooth of the dang cam gear. It's so frustrating to have such a great projector that can't do anything! [Confused]
 


Visit www.film-tech.com for free equipment manual downloads. Copyright 2003-2019 Film-Tech Cinema Systems LLC

Powered by Infopop Corporation
UBB.classicTM 6.3.1.2