This is topic EUMIG MARK S802 8mm parts in forum 8mm Forum at 8mm Forum.
To visit this topic, use this URL:
https://8mmforum.film-tech.com/cgi-bin/ubb/ultimatebb.cgi?ubb=get_topic;f=1;t=008886
Posted by David Galanty (Member # 4098) on January 12, 2014, 05:17 PM:
just got a EUMIG MARK S802 all set up for super 8
missing 8mm sprockets and film track
any idea wher to locate
please help
Posted by Maurice Leakey (Member # 916) on January 13, 2014, 11:18 AM:
The Eumig Mark S 802 is for Super 8 only. However, there was an 802D which was dual gauge.
Posted by John Capazzo (Member # 157) on January 13, 2014, 11:39 AM:
Maurice is correct. If you have the D and it is missing the parts, I have both sprockets, pressure pad and film gate. Also, the main feeder arm would be 8mm and not super 8 if it's the D model.
John
Posted by David Galanty (Member # 4098) on January 17, 2014, 06:32 AM:
according to the book eumig S802 super8?single 8 sound projector
mark S802D sound projector for all 8 mm
how do I tell which I have
thanks for your help
Posted by Martin Jones (Member # 1163) on January 17, 2014, 08:08 AM:
The label on the back of the projector should have the model name on it....S802 D or S802?.
Also,a machine for ALL 8mm formats will have a Switch to change the sound heads between formats (possibly under the front cover).
Remember that Super 8 and Single 8 are the SAME FORMAT... just different names by different manufacturers.
Posted by David Galanty (Member # 4098) on January 17, 2014, 09:59 AM:
ok its an eumig S802
will it run 8 mm film if so are there parts I need?
Posted by Maurice Leakey (Member # 916) on January 17, 2014, 10:01 AM:
No. It will not have a switchable sound head.
Posted by Martin Jones (Member # 1163) on January 17, 2014, 10:06 AM:
Quote... "ok its an eumig S802"
It will NOT RUN the original (larger perforation) 8mm film.
You CANNOT get parts to make it do so.
It WILL RUN Super 8 and Single 8 (small perforation) film as it stands.
Posted by Maurice Leakey (Member # 916) on January 17, 2014, 10:17 PM:
A further thought on the difference between the dual gauge Eumigs and the single gauge models.
The dual gauge models have a single claw which can transport both gauges, this is to fit in the different size perforations.
The single gauge model has a double claw.
Visit www.film-tech.com for free equipment manual downloads. Copyright 2003-2019 Film-Tech Cinema Systems LLC
UBB.classicTM
6.3.1.2