This is topic ST1200D belts in forum 8mm Forum at 8mm Forum.
To visit this topic, use this URL:
https://8mmforum.film-tech.com/cgi-bin/ubb/ultimatebb.cgi?ubb=get_topic;f=1;t=008922
Posted by Mark Todd (Member # 96) on January 26, 2014, 11:04 AM:
Hi looking to get some belts for the ST1200d I am selling possiby. Its the 2 belt version.
I wondered what the profile of those is please. Round ? Sqaure ? V ?
Would 2 from the later 3 belt set fit or are they different please.
Looking for a cheap but OK option.
Many Thanks Mark.
Posted by Richard C Patchett (Member # 974) on January 26, 2014, 07:10 PM:
Greetings Mark
The Upper Take up Belt is Sqaure for the ST 1200 HD
I have 2 in stock NEW $40.00 includes mailing to the UK
RC
Posted by Jim Schrader (Member # 9) on January 26, 2014, 07:43 PM:
Richard he has the 1200D will the HD belt work on that?
Posted by Roy Neil (Member # 913) on January 26, 2014, 11:40 PM:
1200D and 1200HD use the same belts
Posted by Mark Todd (Member # 96) on January 27, 2014, 04:24 PM:
There are 2 varients of the st1200 d, the early one with 2 belts. The later with 3. I`m not sure if they are the same.
I have a feeling the ealier ones may have been round or V and the later sqaure.
Many Thanks Mark.
Posted by Mark Todd (Member # 96) on January 27, 2014, 04:25 PM:
A.
Posted by Rui Luis (Member # 3867) on January 27, 2014, 04:39 PM:
Hello Mark! I have if you want:
http://www.ebay.ie/itm/151218713763?ssPageName=STRK:MESELX:IT&_trksid=p3984.m1555.l2649
you can also check my post :
http://8mmforum.film-tech.com/cgi-bin/ubb/ultimatebb.cgi?ubb=get_topic;f=3;t=002298
Visit www.film-tech.com for free equipment manual downloads. Copyright 2003-2019 Film-Tech Cinema Systems LLC
UBB.classicTM
6.3.1.2