8mm Forum: Need plastic gear for Elmo GS-1200

This is topic Need plastic gear for Elmo GS-1200 in forum 8mm Forum at 8mm Forum.

To visit this topic, use this URL:
https://8mmforum.film-tech.com/cgi-bin/ubb/ultimatebb.cgi?ubb=get_topic;f=1;t=009117

Posted by Jean-Louis Seguin (Member # 2200) on April 16, 2014, 11:46 AM:

I need a plastic gear for an Elmo GS-1200.
Here is a picture.
Can anyone help? Thanks!
Jean-Louis

https://www.facebook.com/bolextech/posts/10152053254873388

Posted by Antonis Galanakis (Member # 1455) on April 16, 2014, 12:31 PM:

Dead link

Posted by Jean-Louis Seguin (Member # 2200) on April 16, 2014, 01:17 PM:

Sorry about that. This should work:

http://s617.photobucket.com/user/bolextech/media/BrokengearGS-1200_zpsea1d1b6d.jpg.html

http://s617.photobucket.com/user/bolextech/media/ELMOGS1200rewindgear_zps6f665f46.png.html

Jean-Louis

Posted by Alex Fox (Member # 94) on April 16, 2014, 01:30 PM:

Hi., Jean. Contact this gent., Leon Norris at 215-439-1228 He will be able to help you . He lives in PA U.S.A. Regards Alex Fox.

Posted by Edwin van Eck (Member # 4690) on February 14, 2015, 08:16 AM:

Is the problem with the gear solved?

Otherwise we can make this gear using new 3D print technologies!
The small gears for teh Elmo GS-1200 are now already avaiable, see: http://shop.van-eck.net/PP-0036.html?_globalsearch=gs-1200

Posted by Edwin van Eck (Member # 4690) on June 18, 2015, 09:44 AM:

I have good news. This gear is now in production again and ready for ordering at:

http://shop.van-eck.net/projector-parts/p-1a/PP-0106.html

ELMO GS-1200, gear for arms with unilateral freewheeling bearing (PP-0106 Van Eck) (new)

New version of steel and high quality artificial fiber.
With unilateral freewheel bearing (one side is free and block the other side)

1 gear
dimensions: inner diameter: 6 mm, outside diameter gear: 20 mm, thickness 12mm
Weight: 5 grams
====

If someone knows the Elmo product number for this gear, please let me know. I have not found yet the Spare Parts List for the Elmo GS-1200 projector.

Posted by Alex Fox (Member # 94) on June 18, 2015, 01:51 PM:

Part # for this gear as per Elmo parts list is P413510 Alex.

Posted by Edwin van Eck (Member # 4690) on June 19, 2015, 06:20 AM:

Good news, another gear for the Elmo GS-1200 new in production again using 3D printing techniques!

ELMO GS-1200, gear for arms with unilateral freewheeling bearing (PP-0106 Van Eck) (new)

ELMO GS-1200, large gear in motor housing (PP-0105 Van Eck) (new)

Newly produced in high-quality plastic.

1 gear
dimensions: inner diameter: 3 mm, outside diameter gear: 20 mm, thickness 7 mm
Weight: 1 gram

Posted by Mike Blasko (Member # 5867) on June 28, 2017, 09:29 PM:

These reproduced gears are great! Is there a small one yet for the supply arm motor assembly? (not on the reel arm?)

UBB.classic^TM 6.3.1.2