This is topic Need Keystone 112 Project Help!!! in forum 8mm Forum at 8mm Forum.


To visit this topic, use this URL:
https://8mmforum.film-tech.com/cgi-bin/ubb/ultimatebb.cgi?ubb=get_topic;f=1;t=009235
Posted by Jay Hunt (Member # 4322) on June 19, 2014, 11:34 AM:
 
I have a vintage Keystone K112 standard 8mm projector I use for film transfers. It was working fine until yesterday when all of a sudden in the middle of a film transfer the ratchet that pulls the film past the aperture began working backward, pulling up instead of down. I have a lot of films to transfer so I either need to get it fixed or buy another used one in good working condition, whichever is the most economical approach.

Can any of you be of assistance?
 


Visit www.film-tech.com for free equipment manual downloads. Copyright 2003-2019 Film-Tech Cinema Systems LLC

Powered by Infopop Corporation
UBB.classicTM 6.3.1.2