This is topic sankyo dualux 1000 belt in forum 8mm Forum at 8mm Forum.
To visit this topic, use this URL:
https://8mmforum.film-tech.com/cgi-bin/ubb/ultimatebb.cgi?ubb=get_topic;f=1;t=009285
Posted by John Jinks (Member # 1036) on July 09, 2014, 06:31 PM:
Hi,
I just got a sankyo dualux 1000 and need the belt size if anyone has it - I might be able to find an o ring to fit locally. Also since the belt is not on should this affect either spindle not turning as both don't. AND the lamp looks good - no burn marks and I couldn't see any broken filament either. Any help would be appreciated.
Thanks a bunch,
John
Posted by Janice Glesser (Member # 2758) on July 09, 2014, 06:58 PM:
Try 2-5/8" O.D. 1/8" width
Without the main motor belt neither the take-up nor the supply reel will turn.
Here's my video on how to install the new belt.
https://www.youtube.com/watch?v=rog95Djbtpc
I don't believe the lamp will project until you have film passing through the gate and caught by the take-up reel.
Posted by John Jinks (Member # 1036) on July 09, 2014, 08:01 PM:
Thanks Janice,
I'm off to find a belt - can't wait to see the 8mm films from the 50s and 60s again.
John
Visit www.film-tech.com for free equipment manual downloads. Copyright 2003-2019 Film-Tech Cinema Systems LLC
UBB.classicTM
6.3.1.2