This is topic Direct image transfer by aerial lenses in forum 8mm Forum at 8mm Forum.
To visit this topic, use this URL:
https://8mmforum.film-tech.com/cgi-bin/ubb/ultimatebb.cgi?ubb=get_topic;f=1;t=009384
Posted by Albert Jacobs (Member # 4350) on August 24, 2014, 09:25 PM:
I have read that you can project an 8mm projector image directly to a camera using aerial lenses. There is no projecting, the image goes directly to the camera. I have not been able to get any details on how to construct such a device. I am afraid to try things out without more knowledge because such a bright image could burn out the camera receptor. Anyone have details?
Posted by Dominique De Bast (Member # 3798) on August 24, 2014, 11:17 PM:
I only know the system that has the projector lens replaced by a micro camera. I don't know if you can do that with any camera or if it works only with special ones.
Posted by Brian Fretwell (Member # 4302) on August 25, 2014, 05:29 AM:
I had thought of trying his after reading of 35mm aerial image printers that were used to combine animation cells with live action. My trouble was finding a good enough large lens for the imaging.
I would think if the projector uses a halogen reflector lamp replacing this with an LED one of the same diameter and of low power could limit any risk as it wouldn't focus all the light through the projector aperture like a halogen one.
Posted by Paul Adsett (Member # 25) on August 25, 2014, 09:29 AM:
There are Elmo projectors available with a CCD device sitting right on the lens. I think it is called the Elmo TRV.
Visit www.film-tech.com for free equipment manual downloads. Copyright 2003-2019 Film-Tech Cinema Systems LLC
UBB.classicTM
6.3.1.2