8mm Forum: Eumig P26 Projector

This is topic Eumig P26 Projector in forum 8mm Forum at 8mm Forum.

To visit this topic, use this URL:
https://8mmforum.film-tech.com/cgi-bin/ubb/ultimatebb.cgi?ubb=get_topic;f=1;t=009398

Posted by Eric Shepherd (Member # 4326) on August 30, 2014, 09:15 AM:

Just acquired one of these which I am going to strip & convert to a lighting feature. I have removed most of the electrical internal parts, but cannot remove the gearbox as it would be too much disruption to the external film drive sprockets. If anyone is interested in the electrical components, which include the motor assembly, lamp, housing & holder, voltage regulators etc let me know. I am looking for a Eumig 8mm 400ft 7inch spool to match the one in the picture.

Posted by Erik Snel (Member # 4017) on December 07, 2014, 04:29 AM:

hello Eric, thats such a shame to destroy this beautifull machine. unfortunately what i think doesn't matter and its your to destroy after all. however. i have a p26 without the motor because it came in as a diy kit with many parts missing so i am interested in those parts from your machine. PM for more information?

Posted by Clinton Hunt (Member # 2072) on December 08, 2014, 05:48 PM:

Just as a comment on this projector..................I got one of these a while ago and the picture was ghosty, so I waited for another to come up for sale in New Zealand and the 2nd one I won goes well...Eumigs can be good reliable projectors and this one takes pride and place in my collection. [Smile]

Posted by Michael Rudkin (Member # 4651) on January 19, 2015, 03:23 PM:

Hi, do you have the power cable, drive belt, the carry case or the manual for the P26?

UBB.classic^TM 6.3.1.2