This is topic Looking for Bell & Howell 10 MS Parts in forum 8mm Forum at 8mm Forum.


To visit this topic, use this URL:
https://8mmforum.film-tech.com/cgi-bin/ubb/ultimatebb.cgi?ubb=get_topic;f=1;t=009695

---

Posted by Douglas Warren (Member # 1047) on January 11, 2015, 09:40 PM:
 
Hi all,
If anyone has a defunct B & H 10 MS they would like to sell,please PM me.The plastic supply spindle on mine shattered and I would like to replace it.That part aside,the machine still runs like a champ.Thanks everyone!
Douglas
 

---

Posted by Jon Addams (Member # 816) on January 12, 2015, 06:30 PM:
 
Hello Douglas,

The plastic supply spindle in the 10MS comes in 4 different designs, the differences being in the thickness of the rear (belt side) and the size of the spindle fins.

I have all of them so if you can post a photo, I am sure I can find one that matches.

Regards

Jon
 

---

Posted by Douglas Warren (Member # 1047) on January 12, 2015, 11:42 PM:
 
Hi Jon,
PM sent your way.Thank you so much!
Cheers,
Douglas
 

---

Posted by Jon Addams (Member # 816) on January 13, 2015, 05:15 PM:
 
Hi Douglas,

Spindle is on its way - You owe me nothing!

Regards,

Jon
 

---

Posted by Douglas Warren (Member # 1047) on January 21, 2015, 06:42 PM:
 
Hi Jon,
The parts for the 10MS arrived today.Thank you very much!
Cheers,
Douglas
 

---

Visit www.film-tech.com for free equipment manual downloads. Copyright 2003-2019 Film-Tech Cinema Systems LLC


UBB.classic^TM 6.3.1.2