This is topic Replacement part for Elmo 380 in forum 8mm Forum at 8mm Forum.
To visit this topic, use this URL:
https://8mmforum.film-tech.com/cgi-bin/ubb/ultimatebb.cgi?ubb=get_topic;f=1;t=009874
Posted by Amy Dahlhoff (Member # 4718) on March 28, 2015, 12:00 PM:
I am wondering if anyone knows where we can get a replacement pulley (bottom with rubber) for a Honeywell Elmo 380 Dual 8 projector with variable speed.
Posted by Steve Klare (Member # 12) on March 28, 2015, 03:16 PM:
Your timing is good!
The motor pulley on my Elmo ST-1200 is on the verge of death and I'm looking at these people for a replacement:
Stock Drive Products / Sterling Instrument.
(Look under "Grooved Pulleys-Precision")
You need to make some careful measurements to make sure you choose the right one.
I extracted the bad pulley from mine today and I'm bringing it to work for a real close look on Monday.
(By the way: What's wrong with your pulley? It looks OK.)
Posted by Amy Dahlhoff (Member # 4718) on March 28, 2015, 07:13 PM:
The rubber is very hard (lost pliability) and no longer grips the metal wheel. Thanks for the info on replacement
Posted by Barry Fritz (Member # 1865) on March 28, 2015, 07:26 PM:
In the meantime you might want to Google rubber rejuvenator and try some of that. It works pretty good.
Posted by Richard C Patchett (Member # 974) on March 28, 2015, 10:35 PM:
Greetings Amy
You can try
Leon Norris
Email him at
LL623norris@verison.net
He lives in Pa USA
He has plenty of new parts for the Elmo's
RC
Posted by Andrew Woodcock (Member # 3260) on March 29, 2015, 05:27 AM:
The metal wheel IS the pulley Amy ?????
Sounds to me that all you need is a new drive belt perhaps or rubber insert on the pulley wheel maybe?
Visit www.film-tech.com for free equipment manual downloads. Copyright 2003-2019 Film-Tech Cinema Systems LLC
UBB.classicTM
6.3.1.2