This is topic BOLEX 18-5L Power Cable in forum 8mm Forum at 8mm Forum.


To visit this topic, use this URL:
https://8mmforum.film-tech.com/cgi-bin/ubb/ultimatebb.cgi?ubb=get_topic;f=1;t=009926
Posted by Paul del Rosario (Member # 4780) on April 22, 2015, 11:50 AM:
 
Hi, all. I'm new to the forum, so sorry if this topic has been covered.

Simple question: is the power cable from the US version of the Bolex compatible with a German version?

Any feedback appreciated.
 
Posted by Steve Klare (Member # 12) on April 22, 2015, 12:14 PM:
 
The projector end should be, but not the other end.

-but before that the projector has to be configured for the local voltage, otherwise the results will range between "unsatisfactory" and downright "tragic"!
 


Visit www.film-tech.com for free equipment manual downloads. Copyright 2003-2019 Film-Tech Cinema Systems LLC

Powered by Infopop Corporation
UBB.classicTM 6.3.1.2