8mm Forum: Beaulieu 708EL "new" spare parts

This is topic Beaulieu 708EL "new" spare parts - 3D printing in forum 8mm Forum at 8mm Forum.

To visit this topic, use this URL:
https://8mmforum.film-tech.com/cgi-bin/ubb/ultimatebb.cgi?ubb=get_topic;f=1;t=010095

Posted by Edwin van Eck (Member # 4690) on July 15, 2015, 08:07 AM:

Hello,

Good news for Beaulieu 708EL projector owners.
We have taken one of the parts in production again:

NEW: Beaulieu 708EL rewind gear + ratchet wheel + pin - PP-0096
http://shop.van-eck.net/?_globalsearch=pp-0096
Three parts combined in new 3D printed part,
numbers from repair guide: 16,17 and 19.
16: O-620012 Pin
17: O-301013 Rewind gear
19: O-240070 Ratchet wheel
Newly manufactured in strong plastic
Suitable for, among others, these projectors:
- Beaulieu 708EL

For all available parts for this projector:
http://van-eck.net/itable.php?lang=en&size=0&cat=film&merk=beaulieu&type=708%20EL

Posted by Andrew Woodcock (Member # 3260) on July 15, 2015, 02:51 PM:

I have already part number 17 as an official spare part from Wittners but parts 19 & 16 are not available from them so this is great news for all Beaulieu owners!

This is therefore another set of parts I will be purchasing from you Edwin in the near future. Well done once again! [Smile]

UBB.classic^TM 6.3.1.2