This is topic Eumig Bulbs in forum 8mm Forum at 8mm Forum.
To visit this topic, use this URL:
https://8mmforum.film-tech.com/cgi-bin/ubb/ultimatebb.cgi?ubb=get_topic;f=1;t=010202
Posted by Mark Kligerman (Member # 4354) on September 13, 2015, 08:14 PM:
Will bulbs for the Eumig S 802 stop burn out all at once or grow more dim gradually? Also, could you please suggest the best place for finding replacement bulbs?
Thanks in advance.
Posted by Steve Klare (Member # 12) on September 13, 2015, 08:37 PM:
The answer to your question is "yes" to both.
The bulbs often gradually dim AND in the end the filament snaps and they blow all at once.
-same process: the tungsten in the filament gradually boils off and deposits on the envelope, darkening it. The envelope gets darker and darker, the filament gets thinner and thinner until one day it's too weak...
I've always liked this guy for lamps:
You just need to be sure you need EFP (100W) or EFN (75W)
EFP 100W
EFN 75W
Eumig 802 may be built with either, and you should stay with whichever it was meant to use.
Posted by Mark Kligerman (Member # 4354) on September 14, 2015, 08:04 AM:
Thank you Steve. I appreciate it.
Posted by Maurice Leakey (Member # 916) on September 14, 2015, 03:20 PM:
Two suggestions for you, Mark
http://www.ebay.com/itm/2pcs-EUMING-Ma rk-S802-D-Sound-Projector-S907GL-S907-Super-8-100W-EFP-bulb-lamp-/351312448176?hash=item51cbda8ab0
http://www.ebay.com/itm/2pcs-EUMING-Mark-S706-S802-S802D-S810-S807-S-807D-75W-Max-Mark-60-EFN-bulb-lamp-/350526767637?hash=item519d060215
Make sure you have the correct lamp. Check what is inside your Eumig
Posted by Mark Kligerman (Member # 4354) on September 14, 2015, 05:30 PM:
Thank you Maurice.
Visit www.film-tech.com for free equipment manual downloads. Copyright 2003-2019 Film-Tech Cinema Systems LLC
UBB.classicTM
6.3.1.2