This is topic Fumeo 9119 no audio..where to start trouble shoot in forum 8mm Forum at 8mm Forum.
To visit this topic, use this URL:
https://8mmforum.film-tech.com/cgi-bin/ubb/ultimatebb.cgi?ubb=get_topic;f=1;t=010379
Posted by Alan Gouger (Member # 31) on December 14, 2015, 09:38 PM:
I just received another Fumeo 9119. Everything works but no audio.
First thing I did was to check the fuses and they are fine. All audio settings are as they should be ( I have a few of these so I am very familiar with the machine )
When I turn on the audio amplifier there is no audio hiss and you do not hear it powering up, no hum, nothing it is dead silent. I do not know where to start beyond this point. Appreciate any pointers. Thanks in advance.
Posted by Josef Grassmann (Member # 378) on December 26, 2015, 11:55 AM:
Hello,
do you know what amp is built in? Standard was 25W, but 30W also used?
Have you measured contacts of amp on-off switch?
Is 1.5A fuse really intact?
Have you measured 35 Volts at circuit board in?
Is pilot light on?
merry x-mas
Josef
Visit www.film-tech.com for free equipment manual downloads. Copyright 2003-2019 Film-Tech Cinema Systems LLC
UBB.classicTM
6.3.1.2