This is topic LED Replacement projector BULB in forum 8mm Forum at 8mm Forum.
To visit this topic, use this URL:
https://8mmforum.film-tech.com/cgi-bin/ubb/ultimatebb.cgi?ubb=get_topic;f=1;t=010455
Posted by Bill Kubiak (Member # 3148) on January 27, 2016, 11:37 AM:
Hi, I have a Sankyo Dualux 1000, is there an LED replacement bulb available for this projector?
Posted by Ty Reynolds (Member # 5117) on January 27, 2016, 12:02 PM:
There is, from forum member Myron Baron. I highly recommend it.
Posted by Bill Kubiak (Member # 3148) on January 27, 2016, 01:49 PM:
DO you know where I can get one, and what the bulb number is? I know it is a weird shaped bulb
Posted by Ty Reynolds (Member # 5117) on January 27, 2016, 02:26 PM:
Myron's website address is:
http://www.dvds2envy.com
Click on the CXR/LED conversion link.
Posted by Myron Baron (Member # 1007) on January 28, 2016, 11:22 AM:
Bill:
My name is Myron Baron. I have a replacement kit for the CXL/CXR 8V 50 W Bulb. My replacement kit is an LED device that replaces the CXL/CXR bulb. Takes 10 min to install. No drilling holes or disconnecting of wires, Just remove the old bulb insert the LED device and connect two wires. check it out.
Myron
Posted by James Wilson (Member # 4620) on January 28, 2016, 11:56 AM:
Hi Myron,
Will these kits work in the UK?
Posted by Myron Baron (Member # 1007) on January 29, 2016, 07:30 AM:
Bill:
I know they sell voltage adapters for different countries, as I use them when I travel, my unit uses an input power supply 110v AC 60 cycles out put 12vdc 3 amps, that's all the info you will need. I'm sure they have have an adapter for 110vac 60 cycles. Let me know how you make out.
Regards
Myron Baron
Bill try this link
http://www.theroamingboomers.com/the-ultimate-electricity-guide-for-world-travelers/
Visit www.film-tech.com for free equipment manual downloads. Copyright 2003-2019 Film-Tech Cinema Systems LLC
UBB.classicTM
6.3.1.2