This is topic Eumig P8 m imperial bulb in forum 8mm Forum at 8mm Forum.


To visit this topic, use this URL:
https://8mmforum.film-tech.com/cgi-bin/ubb/ultimatebb.cgi?ubb=get_topic;f=1;t=010594

Posted by Jari Salakka (Member # 5194) on March 28, 2016, 02:50 AM:
 
Hey all!

Please help me to find a proper bulb for my old Eumig P8 m imperial (nmbr 734917) projector. I have some 50 years old films from my childhood and would like to watch them.

Is the bulb 12 or 230 Volts? the label in the machine says it should be 100 Watts. What is the type of the bulb, the old is missing? See attached photo of bulb place.

What is the best place (in Europe) to buy these?

Or maybe there is some other possibility to watch the films?

 -

BR
Jari Salakka [Confused]
Finland

[ March 29, 2016, 01:29 PM: Message edited by: Jari Salakka ]
 
Posted by Graham Ritchie (Member # 559) on March 28, 2016, 04:02 AM:
 
I am pretty sure the lamp you need for that particular model looking at your lamp holder is a 12v 100watt which has a "4 pin base". Check out the "Van Eck" web site.
 -
 
Posted by Maurice Leakey (Member # 916) on March 29, 2016, 02:31 AM:
 
Jari
The lamp is 12volt, 100watt, and is known as an A1/186. Here is a link to eBay.
http://www.ebay.co.uk/itm/A1-186-12v-100w-Cine-Projector-Lamp-BXT-/160976638035
 
Posted by Graham Ritchie (Member # 559) on March 29, 2016, 10:08 PM:
 
Maurice

The "Imperial" uses the 4 pin lamp. The one shown in e-bay is for the earlier model which was a 2 pin, but was not used in the later imperial.
 
Posted by Maurice Leakey (Member # 916) on March 30, 2016, 02:39 AM:
 
I do apologise for my mistake. I must admit I have never seen such a lamp. I had a P8 Imperial in the sixties which used the A1/186.

My research shows that the correct lamp is the A1/193. Van Eck charge €34.75 for this, however, the British firm of Lamps2udirect are offering these for £17.40 (including V.A.T.) or £14.50 (excluding V.A.T.)

http://www.lamps2udirect.com/photographic-bulbs-lighting/12-volt-100-watt -a1-193-projector-lamp/70503
 
Posted by Barry Fritz (Member # 1865) on March 30, 2016, 01:47 PM:
 
That lamp has the letter designation BWT here in the U.S. It is very uncommon and prices range from 70 to 90 dollars. If you can get them from the vendor in the U.K. that Maurice posted, I would buy a couple of them very quickly.
 


Visit www.film-tech.com for free equipment manual downloads. Copyright 2003-2019 Film-Tech Cinema Systems LLC

Powered by Infopop Corporation
UBB.classicTM 6.3.1.2