8mm Forum: Need Fixng Elmo 912/S Sound Editor

This is topic Need Fixng Elmo 912/S Sound Editor in forum 8mm Forum at 8mm Forum.

To visit this topic, use this URL:
https://8mmforum.film-tech.com/cgi-bin/ubb/ultimatebb.cgi?ubb=get_topic;f=1;t=010687

Posted by Steve Meyer (Member # 5197) on May 07, 2016, 09:36 PM:

I just picked up an Elmo 912/S Sound Editor. It seems I need to have the prism fixed to turn at the same time as the sprocket wheel inside the unit. I don't see anyway to get to it. I greatly appreciate any help. It is a great unit other then that issue. All other functions work perfectly.

Thanks
Steve M.

Posted by Graham Ritchie (Member # 559) on May 07, 2016, 11:09 PM:

Steve first try to turn the sprocket with your finger and with the other hand push and hold that little knob thing "that's sticking out" at the end of that sprocket shaft, while turning the sprocket itself. With a bit trial and error you should be able to get both back in sync...well hopefully [Smile]

UBB.classic^TM 6.3.1.2